URGENT!! Need Datsun H190 rear end 3.54

peterzekert

peterzekert

Well-known member
At the dyno today (all day) and got the engine sorted out. BUT, I'm out of RPMS and need to find a 3.54 H190 rear end (Datsun Roadster and others). NEED IT IN FLORIDA THIS WEEK!

Peter
THREE 0NE F0UR, 7 TOO 4, 7 O 9 8
 
from http://car-part.com/
Year
Part
Model Description Miles Part
Grade Stock# US
Price Dealer Info Dist
mile
1982
Rear Axle
Nissan 200SX 3.545,2.2L,F-MT5,DISC,W/O ABS,CARRIER INVENTORIED 150,000 A 9G12 $350 Charlie's Used Auto Parts USA-TN(Dayton) Request_Quote 423-775-3046 / 800-933-7958 Request_Insurance_Quote
94
1982
Rear Axle
Nissan 200SX F709 $200 Express Auto Dismantling USA-CA(Fontana) Request_Quote 1-909-356-5050 Request_Insurance_Quote
1752
1982
Rear Axle
Nissan 200SX RAY 08/03, TAG# #PARK, GOLD-BROWN 110,000 268 $200 Exit 30 Imports USA-TX(Alvarado) E-mail 1-817-790-2992 665
1982
Rear Axle
Nissan 200SX EXTRA $200 Marler Auto Supply, Inc. USA-ID(Idaho-Falls) Request_Quote 800-444-9707 / 208-523-4187 Request_Insurance_Quote
1426

OR
 
I am 10 miles from the place in Dayton, TN if you need me to go check on it. I have to go to Dayton tomorrow to get some new trailer tires, let me know if you want me to go by there.
 
Will, Darryl, Mike, Joe, Fred, Curtis, Mickey,

[Edited to correct Darryl's spelling.]
Thank you all.

I had to settle on a 3.70 LSD, so I'll be going with 3.70 and the 3.89 LSD in the car. That's the closest I could get. [I can't just use a 3.54 center section. I have to rob the ring and pinion and build something.] I spent the most part of the last 24 hours building a 3.70 LSD out of a 4.11 LSD and a 3.70 welded. Lots of surface grinding carrier bearing races.

Peter
 
Do you still need a rear sump pan and related parts. I need a front sump setup and will trade you my rear sump.
 
You must log in or register to reply here.
Back
Top