Spridget Dog Box Parts

[Rob Futcher]

I am looking for new or lightly used shifter forks and shifter rails for Richmond and/or Taylor Spridget dox box conversions.

Let me know if you have any spare parts around.

rob.futcher@yahoo.com or PM me.

Thanks!

 

[mg_john]

Can't help you on the shifters but I learned from Mike Miller of Comptune that I could weld the cone shaped hole where the locating screw holds the shifter on the rail, re-position the shifter on the rail and re-drill a hole in the proper place using a center drill bit. All this on my Webster Spridget box.

Very tedious for me to locate the proper location. Had to dry assemble all rails/shifters to really see how things lined up.

After a few false starts, I got it right.

You could start with lightly used stock rails and modify as above.

Hope this helps,

John

 

[craig chima]

Rob,

I've got one pair of new Richmond forks left that I'd be willing to sell. Bought from Lace and Aaron just before they closed shop. You can PM me or email me direct at chima97@aol.com Craig