Sterling
Well-known member
Falgtronics and AIM dash
Could not find a set of instructions to integrate the AIM dash with Flagtronics.
Figured it out and did a write up of the process.
Write up includes Includes:
wiring examples; screen prints; how to test; and Alarm configuration files to load into the AIM dash.
Send me an email to Sterling@SterlingProfessionalResources.com and I will reply with the write up.
Some feedback would be appreciated before more widely distributing.
Sharing with the Prod Community first as you folks are the best.
P.S. AIM import files are for a MXS 1.2 which is likely exactly the same as the MXG. For an MXL I expect they will load and then can be edited. Still easier than adding from scratch.
.
Could not find a set of instructions to integrate the AIM dash with Flagtronics.
Figured it out and did a write up of the process.
Write up includes Includes:
wiring examples; screen prints; how to test; and Alarm configuration files to load into the AIM dash.
Send me an email to Sterling@SterlingProfessionalResources.com and I will reply with the write up.
Some feedback would be appreciated before more widely distributing.
Sharing with the Prod Community first as you folks are the best.
P.S. AIM import files are for a MXS 1.2 which is likely exactly the same as the MXG. For an MXL I expect they will load and then can be edited. Still easier than adding from scratch.
.