British UNF Fitting help

[blamkin86]

Folks,

I need a long(er) 3/8 UNF fitting, male, to hook up a brake master. A 4AN fitting will screw down in the master, but I believe the cone at the bottom has the wrong taper.

Anyone know where I can get UNF adapter fittings? I found something on McMaster but it goes to NPT which I think is discouraged for brakes.

Thanks in advance,
--Bill

 

[HPCRX36]

http://allstarperformance.com/product.h ... 030&add=no

We use the ALL50030 fitting to connect to the clutch master cylinders on Sprites and Midgets for our 5 speed kits.

 

[R. J. Sorensen]

Not in shop now; going from memory. If you're looking for the male nut to compress a 1/8" line spherical flare inside the female hole of a cylinder, try some older British hydraulic line fittings. I remember these being straight thread about 3/4" long. Sprites, Midgets, and probably Triumphs and Minis.

RJS

 

[blamkin86]

Thanks Will - I'll dial up one of those for the clutch.

RJ that lead me to a search which helped me find ...whoops that's not exactly right.

http://www.mossmotors.com/Shop/ViewProd ... exID=54266

I will contact them. I'd like to find a 3/8 UNF male to -3AN male adapter - if that's even possible.