Rob Futcher
Well-known member
Still working on moving various spare parts from my Lotus Seven and am seeing the level of interest for the parts compared to the complete engine. The engine internals are all less than 4 full weekends old. Carbs are 10 weekends old and modified by George Bachman.
All prices are open to offer, but please no low-balls. Willing to make a better deal for if you want more parts.
Arrow Crank $2,250
Mid-West Motorsports (Bauchman) Billet Cam with 2 piece Followers $1,400
Adjustable Duplex Timing Gear $200
TDC Oil Pump Assy $1,100
Water Pump, 44 tooth gilmer pulley and crank pulley $200
Head Complete with New Springs/Followers by MWM $2,500
Titan Roller Rockers $1,000
Light Weight Tubular Push Rods $300
Oil Pan $300
Plumbing (pan to pump) $300
Cast Aluminum Rocker Cover $120
Twin 40 DCOE Carbs $600
Forged Pistons $800
Cunningham I Beam Rods $1,100
Other Parts:
Gearbox - Houseman T-50 Dog 'Box $3,500
Ultra-Light Steel Flywheel for 5.5" Clutch new (4.4lbs) $450
Quarter Master Pro 5.5" Clutch (Used) $300
Clutch (New) $600
New Clutch Plate (1"X10 spline) $90
Annular Clutch Slave and Bearing $60
New Aluminum Bellhousing $220
Re-ground Elgin Cam $100
PM or email rob.futcher@yahoo.com
~Rob
All prices are open to offer, but please no low-balls. Willing to make a better deal for if you want more parts.
Arrow Crank $2,250
Mid-West Motorsports (Bauchman) Billet Cam with 2 piece Followers $1,400
Adjustable Duplex Timing Gear $200
TDC Oil Pump Assy $1,100
Water Pump, 44 tooth gilmer pulley and crank pulley $200
Head Complete with New Springs/Followers by MWM $2,500
Titan Roller Rockers $1,000
Light Weight Tubular Push Rods $300
Oil Pan $300
Plumbing (pan to pump) $300
Cast Aluminum Rocker Cover $120
Twin 40 DCOE Carbs $600
Forged Pistons $800
Cunningham I Beam Rods $1,100
Other Parts:
Gearbox - Houseman T-50 Dog 'Box $3,500
Ultra-Light Steel Flywheel for 5.5" Clutch new (4.4lbs) $450
Quarter Master Pro 5.5" Clutch (Used) $300
Clutch (New) $600
New Clutch Plate (1"X10 spline) $90
Annular Clutch Slave and Bearing $60
New Aluminum Bellhousing $220
Re-ground Elgin Cam $100
PM or email rob.futcher@yahoo.com
~Rob