Search results

What method are you guys using (metal or kevlar blanket)? And when was the last time anyone experienced (or knows about one) an exploding clutch or flywheel? Thanks,Clark

OK - I think this is working… How about a "Vintage Prodfest" at this event? This is the poster I did for the Triumph gang as this event will be the 2015 Kastner Cup Event.

Can I invert (body up, shaft down) my single adjustable coil over Spax shocks? These are about 10 year old (rebuilt) aluminum body units. Thanks, Clark

Anyone experienced viberation at higher speeds (around 70MPH with a 4.11 gear) with a welded diff?

Any one have advice on buying re manufactured alternators? prices range from $130 at my local auto parts to $50 on amazon... Thanks, Clark

I recently purchased a set of older Revolution wheels to use for my rain tires. They have been media blasted and I will be painting them, but the problem is getting them bolted on the car. They have the old style shouldered nuts with the flat washer that seats against the wheel and the nut...

What's the best way to clean a lexan windscreen? Can light scratches be buffed out? And rain x didn't seem to work the one time I tried using it. Should I use something else? Or just put a wiper back on-or will that scratch the lexan? Thanks, Clark

Anyone know what happened to this outfit? Who has their molds now? Thanks, Clark

Anyone ever replaced the rear leaf spring with an upper control arm (and coil overs, of course)?

Earlier models of the GT6 had a small set of louvers in the hood (and on the front quarter side portion of the "bonnet"). The question is, can I add these to my hood, which did not have them, and do they have to be duplicates of the original in size and location? (as per Prod rules)

Can someone give me an idea of the Horsepower range of a prod spec 13B ? Thx, Clark

Looking for recommendations.

Are these plastic honeycomb screens a good idea? Do they effect cooling efficiency? Thanks, Clark

I am just winding up my GT6 Lexan windshield installation and thought I might relate some things I learned. #1 - make a very accurate pattern out of something close to the thickness of the Lexan - I used the soft masonite and scored it to help bend at the outer edges. I used an ordinary saber...

I'm installing a Lexan windshield that will be held in with #8 button head bolts. Do I still need to fit the external aluminum clips the GCR requires on a stock windshield? I assume the three inside straps are still needed. (GT6 EP)