Search results

Garage sale. Email me disquek@yahoo.com Pics at: https://www.facebook.com/groups/5278203 ... 3407193099 Goped GSR40 - Runs great - mods just for reliability (chain tensioner, etc) $600 Perfect pit vehicle. 2 Panasports $150 4x4.5 13x6 Springs Hypercoil $50/pair: 2.25x8 200lb 2.25x8 275lb...

For those of you with ITBs (if you have a single TB, sorry - it's different), are you using a manifold vacuum reference to your fuel pressure regulator? I've made a manifold vacuum manifold (of about 6 cubic inches) to dampen the signal, but I'm still concerned that the fluctuations in an ITB...

ChaseCam PDR100 with the super caps (so you can turn off the unit and it will complete the recording), on screen G force display, and auto start /stop. Plus the super trick quick release mount they sell for the recorder and a custom mount for 1.5" roll cage tubing for the camera. Shoots DVD...

I dont see anything in the GCR against it. :wink: http://www.foxsports.com/motor/story/fo ... 016-113015 :-[... -Kyle

I have four sets of brand new Hawk DTC70 HB101 U.800 Racing Brake Pads for a Wilwood Superlite caliper (or other calipers that use the same shape like an Outlaw 4000, etc). They're on eBay now. Feel free to pick up a set via eBay or email me at disquek@yahoo.com ...

Who's going? I look forward to this race all year. Even after racing at VIR and Mid-Ohio, The Glen is still my favorite. Historic, fast, demanding, beautiful ..... -Kyle

I noticed some friction in the throttle return. I determined it was in the carbs. You'd release the lever gently and it would hang at about 25% open. It would easily close if you pushed it, but would hang open if you didn't. I then figured out that the cause was that the accelerator pump...

After the MO rain race the race car is very very dirty EVERYWHERE. I'm not a believer in using a pressure washer on a race car. I'm more of the garden hose and soft brush type. Typically I just use car wash soap and water. I'm wondering if anyone has used anything that works better than car...

Spring is coming. Time to dust off that race car and start prepping it! Who's in? -Kyle

moden street cars have systems that alert you if there is a car next to you. Could this be easily adapted to a race car and would it be of value? Kyle

I've found 28 and 32. I really want 30. Here are some pics of mine. I would prefer that the face be undrilled. Center hole is fine. Does anyone know where I can get a 30 tooth? Ideally 1" wide. -Kyle

Looking for someone who as experience with steering rack mount reinforcement on an S2 Seven. Looking for design ideas. Please email me at disquek at yahoo dot com Thank you! Kyle

Sorry for the GT related post here. But the GT forum is all but dead, and most of the GTL folks are here. I'll pull it if there if enough folks are offended. Just a happy data point. I know there are many of you that see the SIR a hardship without an upside. Here is why I see it as a...

http://www.sportsmansguide.com/product/ ... ?a=1711959 <edit> Doh ... I just found that these are likely 6 liter or 1.5 gallons. A bit big for a catch can. http://oblio13.blogspot.com/2010/10/gea ... metal.html -Kyle

Hi Folks, The North East Division Mini Con is coming up shortly and I wanted to post that in addition to the usual Director's Town Hall; Butch Kummer, from the national office will present on the Majors race program. In light of last week’s announcement of an overhaul of the club racing...

I've watched a few of the runoffs videos and I'd like to say thank you to the folks that made it possible. I wasn't a fan of the move from TV to webcast, but I have to admit I'm convinced now that this is better. Also, the broadcasters, commentary, production quality, and video quality are...

There are tons of places with ducts for 3" hose, but I cant find one for 4". Ideally it would be clear. -Kyle

This is a GTL question. I installed a diff cooler and the temps dropped some, but not enough. I have all the data (it might be a bit much for a post) from the temp sensor both before and after I installed the cooler (different tracks). The question is, is there a good way to figure out how to...

This disc as well as the rest of the clutch assembly was new at the start of 2011. The flywheel was newly resurfaced. I ran 6 races on it. The only notable wear on the disc is on the outer edge. The floater/pressure plate is warped badly (about .050). The flywheel seems fine. I put a a...

Hi Guys, I'm having a heck of a time finding a replacement throw out bearing for my GTL car. The current bearing is a Nachi 40trk39-1. I've guessed at the application and ordered several based on those guesses and on cross references. Everything that came turned out to be dimensionally...