Search results

Looking to source a nice race ready FP spec SCCA spridget. Preferably one with all of the go fast bits and pieces. A rock solid foundation to do some vintage racing in. I do not want to buy a car with a lot of prominence, because I will most likely use parts off this car as part of another...

I've got a new set of front XP12 Carbotech pads for the 1.6 Miata. $165 new, I'll ship them for $125. PM if interested.

Here’s one that won’t come around that often, so guys interested in going FP racing in a top level Miata should take a look. This is my no expense spared build that I raced in the MARRS series this year. The goal was to cut my teeth and chase the regional championship, then prep the car to go...

I just listed this helmet for sale that I wore for only one session. I wear a balaclava too. It seemed to fit fine, but once on track and in the wind, I found it to be too large. http://www.ebay.com/itm/110959089181?ss ... 1555.l2649

I've got a set of tow plates and a camber gauge and this is what I use to set up my car. I work out of one side of my oversized basement garage with a floor designed to drain melting snow, so it is not level. At the beginning of the season I took my car to a shop and using an alignment rack...

There was a double national this weekend. I'm not very good with mylaps, but was hoping someone could point me toward the results.

Great gallery of photos from Summit Point circa '74. Group 44 cars throughout. Also see some guys in there that were racing with me at Summit Point this past weekend. http://summitpoint.taylortek.com/index1.htm What's intersesting also is the number of spridgets in the photos. About as...

I have a new Longacre camber gauge. I bought this and put it away. I then forgot where I put it and bought another one. Well, guess what I found? $100 delivered. PM or email at thinkracing (at) yahoo (dot) com

My wife and I are looking at diesel motor homes capable of hauling about 10,000 pounds of trailer, car and gear. Currently, I'm pulling with a F350 Super Duty, but I'm looking at a Winnebago Class A diesel pusher that has a Caterpillar 7.2 liter turbo diesel. 330 HP, 860 lbs of torque and...

I was told by a friend of mine about a new rule for next year. 2" numbers placed near your class designation indicating your car's weight. Anyone heard of this new rule - if it in fact is a rule?? I can't find it in the GCR, but I'm looking at 2011.

I've got this pump in my ATL fuel cell http://cdn.racerpartswholesale.com/down ... ackBox.pdf Anyone familiar with it's operation specifically it's pumping operation? For example, I've always had a Holley Red and when on, it just pumped continuously whether it was connected to carbs or not...

I've got one hub on my 1.6 Miata that needs an extended ARP wheel stud plus I want to buy a couple of spares. I didn't buy the ones on the car, so I don't have a part number. The lugs take a 13/16 socket so I'm not sure if that means the stud is a standard thread or something else. Help?

No race results up and I've been stuck doing honey-dos all day. Who won the GTL race today? Any update?

As the FP race quickly approaches, if you have not gone to Speedcasttv.com you should. The coverage is very good! I've had it up all morning while at work.

I have a sponsor who is making a sizeable investment with me to go production car racing next season. He is recommending I incorporate. Has anyone out there incorporated their race team for the purpose of providing racing services on behalf of sponsors? To date, I've just accepted payments to...

My autometer tachometer is reading 7k when the car is running at 3.5k and pegs at 10k when only doing 5500k. Its a FP Miata. I've checked the wiring and even adjusted the pulse settings on the Electromotive to see if anything made a difference - 1 pulse, 2 pulse, no pulse. Doesn't matter. It...

I have the TEC3R and recently sent it off for its upgrade. It came back and I installed it back into the car and connected it to the harnesses. I Downloaded the Win4 software onto my laptop and went down the garage to upload the bin file. Turned the power on - Electromotive's green light came...

Electromotive has stopped writing code for the Tec3 and are now offering upgrades to existing units to run its version 4 software. Has anyone made the change and could explain the value in upgrading?

I've seen threads here before on this topic, but I was unable to locate them. There are the normal players when contracting car/parts delivery, but I'm also wondering if there are smaller players out there that own a pick up and an enclosed trailer and can grab more than just a car, such as...