Search results

  1. Darryl Saylor

    April 2024 Fastrack Discussion

    Here's an installation of the Flagtronics FT200 on youtube. flagtronics ft200 Mike Miller's Spridget had his on the left side of the steering wheel and the antenna in the middle of the car just in front of the windscreen. You might want to ask him. I think I want mine where the camera can...
  2. Darryl Saylor

    April 2024 Fastrack Discussion

    After seeing it this weekend, it's growing on me. I saw some advantages to having it. It's not the device in the car anymore that concerns me, it's the staffing at a small Majors or Regional race when it's made a requirement for those races. It will be another specialty in the tower.
  3. Darryl Saylor

    March 2024 Fastrack Discussion

    I replaced my stock taillights on my Spridget with red 3d printed ones and the top was the rain lights and the middle was the brake lights. Have to fix that now
  4. Darryl Saylor

    Fuel injection

    Found these 31 mm throttle bodies. http://www.yuminashi.com/-pcx125-31mm-throttle-body/ I was wondering if you could make a cap to go where the piston is on the su carb where the injector mounts. You would have to plug the hole where the jet comes thru. Take this with a grain of salt...
  5. Darryl Saylor

    Scattershield for an '84 CRX

    I need to put a scattershield on my CRX. The engine is in the car so putting it in the engine compartment will be difficult. I thought about putting it from the right side of the gas pedal to the right side of the indention at the center of the firewall. Anybody got any suggestions on size and...
  6. Darryl Saylor

    1965 Austin-Healey Sprite H Production Race Car

    1965 Austin-Healey Sprite H Production Race Car $4400 As it sits in the garage now. Stock engine with Crane 296 Cam Picture of cockpit video with car running https://youtu.be/JCGl8qc7WjE I put my back up motor and put a set of stock carbs together and put them in the car. 1275 Stock...
  7. Darryl Saylor

    Welding a pin hole in a cylinder head

    My dad gave me a Austin-Healey 100 cylinder head. It has a pin hold in the V part that goes into the water jacket. Where can I get it welded. I took it to my local machine shop and the guy there said it could be welded then they could mill it back smooth.
  8. Darryl Saylor

    Honda Wheels

    First: yes Karl K. I bought a Honda CRX :-) Time to start asking questions and show my ignorance on wheels and tires. I'm not sure what to do about wheels and tires. I'm use to 20x8x13 tires and 13x6 wheels for my old Spridget. I'm trying to budget for next year and set up a plan. I'm...
  9. Darryl Saylor

    1984 to 1987 Honda CRX /Civic Struts

    What's everybody running if they can't find Yellow Konis for the '84 to '87 CRX/Civics? That's reasonably priced. I'm going to run my CRX first before I do anything but trying to figure out what I need to look for and budget for.
  10. Darryl Saylor

    1965 Austin-Healey Sprite HP Race Chassis

    1965 Austin-Healey Sprite H Production Race Chassis https://drive.google.com/file/d/0B08eeK74S-l4QktZSG1SWnd5Y2c/view?usp=sharing video of car now. http://youtu.be/hdvv0dRe9s0 Front and rear sway bars. Pan hard bar Rabbit Radiator with an electric fan Stock Master Cylinders with cockpit...
  11. Darryl Saylor

    20’ x 8.5’ Open Trailer for sale

    20’ x 8.5’ Trailer Open trailer with 3500lb axles and electric brakes on both axles. The box is 3 feet deep by 42 inches tall and 8.5 feet wide which leaves 17’ bed. There is also a tire rack. $2400.00. Located in Mt. Juliet TN (just East of Nashville) I can be contacted at (615)_453 _ 8 3 7 6...
Back
Top