Search results

Here is a small collection of AN parts for sale. Due to health reasons I am out of racing activity and am trying to clean out the shop. SOLD! Thanks for looking. Some of these are brand new like the two boxed Russell 661790 adapters and some are used but in good shape. Cost for the lot is $25...

I'm planning on adding an Accusump to my 1275 GTL Spridget. What is the prevailing wisdom on using or not a check valve in the system? Thanks, John Hewell #29 GTL/HP Spridget

I'm fabricating a front splitter to run on my Spridget in GTL form. What distance from the ground should the lower surface of the splitter be? I think the lower, the better it works. But I don't want to destroy it first time out! Picture shows it sitting about 1.5 inches off the garage...

Ok, you tech guys have convinced me that I need to add an O2 sensor/gauge to the ole Spridget HPLP. I am pretty sure I was on the rich side at the SIC and the Prodfest with high EGTS but no problems with the engine. I have looked at some afr gauge/sensor kits online but am unsure which one to...

Don't forget to inspect your car throughly over the winter. I mean all of it. Attached is a picture of a serious crack I found in the right lower trailing arm mount of the rear axle housing. I found it with a casual look-at of the rear suspension. The picture shows the housing in my shop press...

On my HP Spridget I have been using the stock front shock with the valves removed and a tube shock. Am considering using a Frontline upper mount as a replacement. I bought one about 5 years ago intending to use it for the street car but never got around to installing it. Two questions please...

My HP Spridget has rear discs which have been on the car for some time. They were on the car when I bought it. It is Kenny Purgeson's old #29 car which I believe ran at the Runoffs years ago. The log book starts in 1977. While looking over the car in anticipation of going to Sebring...

Am trying to figure out how to mount the chassis end of an upper trailing arm for ther rear of a spridget. The axle end is mounted to a welded tab on the top of the rear end housing. The two lower arms are to be mounted at the original spring hanger location. All three arms are about 16.5" in...