Search results

H prod Bugeye is up for sale after running the HPI event at Mid Ohio yesterday. After 40 plus years I have run out of compression. This is Tony Chiles old car, you can read about it on this forum. Coil overs all four corners, Wildwood calipers (big ones up front) with Carbotech pads all around...

Holley fuel pump p/n 12-801-1, think it’s often referred to as the red top. Was a spare when I was running a Weber carb, fuel pressure is at 7psi. Please refer to Holley.com for the specs. Jegs sells for 160$, but for you 100$ and I will ship or 85$ if you’re local. Never used, never installed...

Does anyone have a radio system they could recommend? One referral was Track Side Radios, but they seem to be out of biz. It appears one could put together a system via Amazon for cheap but… Any recommendations would be appreciated. Thanks EZ

Wondered what the thinking would be on differential ratios per track for a limited prep 1275 HProd Bugeye? Have a 3.9 in the car now for Mid Ohio. What would be suggested for PittRace, Road America, Gingerman or Grattan? Thanks EZ

A Huffaker copied thru tunnel exhaust that I no longer need. Stainless steel very good looking piece. Not cheap: asking 1700$. I can package up and ship. Email me at ezanner@gmail.com for more pictures. Thanks EZ

For sale: have a platform for Longacre scales that I cannot use (scales are NOT for sale) that need to go. Just too long and a touch wide for my Bugeye. Pad squares are 17.5” square, runners are 72” long and 68”long. There are adjustable feet under the pad squares. Call/text me at 614-937-7632...

Selling the close ratio rib cage gearbox I got from Rod Hahnemann (Spridgetech fame I believe) last spring but never installed, never used by me. He described it as: Fresh Ribcase Sprite/Midget straightcut trans. Med Engineering gears. Located in Columbus OH by the airport. Text or call me at...

Just look at the schedule for the upcoming Buttonwillow majors race - it is well thought out. Two sessions on Friday, etc with warm ups on Sunday; all done by 3:15pm on Sunday. Just a very agreeable schedule. Is Buttonwillow just that inexpensive to rent? ez

I know this is the Prod forum, mea culpa mea culpa, my vintage spridget is for sale over on the MGEXP.com website as a roller. Call 614-937-7632 or email Ezanner@gmail.com with questions… Thanks EZ

Anyone have a RR fiberglass quarter panel for a Bugeye. Mine failed shortly after my steering arm failed at MO. Thanks EZ

Is there any benefit to setting up a valve train (limited prep 1275) using solid spacers versus springs in between the rockers? Thoughts? ez

Have a Bugeye H Prod car that moves almost violently left to right under braking. The harder the braking the more violent the movement left to right. It was unsafe at Grattan. Toe is set at zero, uses the common big brake kit (MGB calipers, Spitfire rotors etc); uses Tilton 0.625 bore front M/C...

Has anyone heard of SRP calipers? There is a pair on the rear of the Bugeye with disc brake conversion that will be my HProd car. Has bleeders on both sides with a cross over fluid pipe underneath (should have taken a picture - arrrgh). Cute little brake pads. No number or other identification...

Be scared...be very scared...and yes, I don't know how to upload JPEG files. Arrrgh!

When can one expect registration to open for a Majors Tour event? Two months before? One month before? Thanks

Need to buy a canopy, there was some discussions on this a while back but no joy from the search function, probably a 10x10 or a touch bigger. EZ UP offers an 8x12 that would seem to be a perfect size. Car is a Spridget and usually it will be a one man show opening it up and taking it down...

What car - pit radio systems have you found reliable and easy to use? Biggest track would be Road America. Info as to specs on the system would be helpful. Thanks.

Need a vented timing chain cover for a 1275 MG/AH Spridget motor. Any one have a cover they can spare? Needs to be the vented type. Thanks Erick

Can anyone point me to a write up on removing the camshaft from a 1275 engine while the engine is in the car? I saw it last night but now I can't find it. Has anyone tried this? The author used magnets to hold up the tappets while the cam was removed. Thoughts? Thanks EZ

Saw the double regional at Nelson for this weekend was cancelled. Any reason why? Thanks EZ