Search results

I am thinking of purchasing a set of World Wide Imports adjustable lever dampers for my HP sprite. Over the many years of racing my Sprite I have found the fluid viscosity that works for me. But, I am thinking that I may be leaving something on the table. Can anyone help me with some fedback on...

Wondering if anyone might have a set of World Wide Imports adjustable shocks for a Bugeye Sprite.

I'm planning the build of my 1275 lp engine and started to think about crankshaft prep. I am starting with a std./std. crank and will be having it turned to .010/.010 to set the proper clearances. Is nitriding necessary and if so who can do it. Thanks

I'm using the early Electromotive ignition on my Sprite and am having a loss of fire to the plugs. Does anyone know of a way to test the crank sensor? Thanks

Anybody have any experience or information about Nural pistons. I found them while researching pistons for LP engine . Price is resnable but? Here's a link.http://empirebritishcarparts.com/SPRITE ... p2326.html

I'm sure that this was answered some time ago, could somebody please re-submit what the numbers on the nose of a De Long cam mean? Thsnk you.

Just putting the oil in the rear end of my sprite for Sebring next week and I was wondering if anybody has tried NOT filling it till the oil runs out the sight hole. It measures about a quart at that point. If not what amount due you use. I have tried to seal thd axles to keep the oil from the...

If anybody has some Winners Circle 1/4 elliptic offset springs that are not needed anymore or that have broken or missing leaves I would be interested in buying them. I want mix them in with the ones on my car for tuning. Thanks Kerry

If anybody is looking for 6 x 13 wheels there is a set of Panasports on ebay. http://www.ebay.com/itm/271111536983?_trksid=p5197.c0.m619

I suddenly find myself in need of a Revolution wheel for my Sprite 4 x 4 pattern, 6 x 13, 4 spoke design. Just need one. Thanks

Has anyone ever made their own sway bar? Bought a piece of mild steel round stock and heated and bent it to fit. If so, what procedure used and any problems incurred?

I am renewing my search for a 7/8s front sway bar for my Sprite. I asked this question before and somebody replied that they had one(even gave dimensions). I'm sorry but if that person, or anyone else that has one for sale would let me know I would appreciate it. Thanks.

Just saw an add on Ebay for a NOS straight cut close ratio gear set. Here's the link.http://www.ebay.com/itm/Austin-Healey-S ... 7e&vxp=mtr

Doing the MGB caliper/ Spitfire rotor (big brakes) on my Sprite and I need to know what size master cylinders to use. Thanks for the help.

I have a Hans Device or sale. It is a large, 20 degree, economy model with QD tethers( I would have the sliding tether installed). It does not have the cushions that velcro to the bottoms of the shoulder pieces. Used very little so condition is very good. I can send pics if you are interested...

Well it's time to do the conversion to big brakes(MGB calipers & Spitfire rtrs) on my HP sprite. Is anyone willing to share the manufacturer and pad material they are using with four wheel disc brakes on a spridget? Thanks for any help.

Just looking for some opinions. On a spridget when you have 4 wheel dics brakes do you run the same compound front and rear or mix it up?

Anybody care to divulge the camshaft numbers they have found to work in a LP 1275. Thanks.....Kerry