Search results

Sorry to see you guys go and wishing you best of luck at the Runoffs. At age 75 me and my ex: Rick Harris car may not be far behind. Tom B.

I have two(2) PowerTrain Technology clutches for sale. Both are 7.25" two (2) disc with 1 5/32" x 26 tooth spline. I am selling these with lightened flywheels and as you can see the friction discs @.105" are as new. PTT provides lifelong (no charge) clutch inspection and evaluation at their...

Miata or RX7- Barrington Performance Dog Ring Transmission • Uses OEM case -100% bolt in using standard trans mount, driveshaft, throw out bearing/arm • and clutch slave cylinder. • No modifications to trans tunnel required. • 5 speed with 4 usable track gears, a pit gear and reverse. • Uses...

Perhaps many of you already know this, but Electromotive has at this point" folded up it's tent". No sales, no repairs and no tech support. Those of us who have their devices in our cars had best treat them gingerly and hope for no major issues. I've personally had major issues with the Tec3r...

So, which one is right? "Sports Car" indicates there is no race. SCCA website says there is a race sandwiched in between VIR and PIR. This race was apparently resurrected several months ago based on e-mail correspondence I received. Also, it seems that the Pocono majors race has been...

This past fall I did a local regional race at which the wearing of proper socks was an inspection item (post race). Upon being asked to see my socks the tech guy indicated I was not compliant due to the fact my nomex socks did not have an FIA sticker on them. I couldn't prove they were nomex...

I've been having problems with my Electromotive TEC 3r ignition system going on almost two (2) years now with no concrete diagnosis as to the problem. Electromotive says they can't replicate my conditions so they have not been much help. I'm on my 3rd ECU, the most recent being a brand new...

I need to tap a 1/8-27" NPT threaded hole into the front of a block off plate. The "book" says to use a 'R" lettered drill bit which measures .339". I've got quite a few tools but no lettered bits. Does anyone know if a fractional or numbered bit would suffice to accomplish the same thing...

Anybody currently using a ZAMP?..and what do think about it.? I considered one a while back when they were made in Italy....now made in China. Discovered yesterday that BELL has or is moving its production to Behrain...don't know if I understand that. Apparently IMPACT is the only US...

As of the last Sportscar (3/16), here are some observations.: Two(2) of our Majors are combined with other divisions. (losing Pocono resulted in the 2nd one) . ..and VIR and M-O are on the outer fringes of the division geographically. There appears to be only fifteen (15) regional dates and...

I'm trying to view the GCR on line but can't seem to access it. I go to "Road Racing" then" Rules" then it says to click on link below ,which is a Fed Ex Mobile printing ad. I'm then supposed to click on "Doc Store catalog"...what the hell is that? It used to be easy, now it's like trying to...

Looking for 6-8 ft of #8 ss braided hose. If you've got some un-used let me know. Thanks Tom B.

This winter I'm hoping to reduce some of the 60 lbs of excess weight off my FP Miata. We all know some of it should come off of me (and it will) but the car is also a candidate for a diet. The subject of fiberglass panels and specifically doors is one of my focal points. The rules indicate...

I know someone just getting into SCCA racing who is in need of an enclosed trailer. 20-22ft max, twin axle, beaver tail, roof vents, some lighting and 110 outlets at the bare minimum.If its got more bells and whistles that would be great. Good to excellent condition. Will haul an SRF. If you...

He guys my former FP 914 is for sale . I'm not the current owner but it appears to have been well maintained and comes with two motors. New paint but kept in my original colors. Some of you might remember it. Wish I could buy it back, but no place to put it. Just hoping it finds a good home. Tom...