Search results

OK, I realize this isn't going to help me win any races, but I'd like to learn something as always. I've redone my dash and center console, by welding some flat aluminum as a "frame", then mounting my gauges etc onto a carbon-fibre panel, which in turn mounts to the aluminum frame, mounted to...

Where did we wind up on the screen meshes on the front grill/bumper/openings/etc? I'm getting ready to refactor my front bumper/airdam and would like to push my current screen out near the front of the grill opening. It's currently tacked on the back of the opening, several inches from the...

It'll save me a couple hundred bucks to use some tilton 5.5" dual-disc clutches in my QuarterMaster housing. Far as I can measure, it all looks ok - the tranny-side disc for the QM has a 1/8" thicker splined hub where the disc is riveted - that's the only difference I can find. As the floater...

Hi folks - I am looking for a monoball/bearing housing - one that has snap rings on either end. Here's a few examples: http://ubmachine.com/monoballhousings.html The size of the monoball is 2.375" OD. This is for a swaybar mount. I'm ultimately trying to tig together something like this, but...

Hi folks, I'm looking for a threaded insert, which I've seen used as an inner heim-joint mount on a control arm. I was pretty sure UBMachine sold something, but I looked through their catalog this morning to no avail. This picture is not exactly what I'm looking for, but gives you an idea...

OK, after a lot of research, I think the Miller Dynasty 200 dx is what I want. Don't see myself needing anything bigger. Before I shell out the big bucks for one of these things, someone tell me I wouldn't be just fine with a syncrowave 200 or a precision tig 225... or the Thermal Arc ArcMaster...

My supply and return fuel lines both travel right next to my dry sump tank. I'm looking at some sort of heat shield tubing, but before I spent a ton of money thought I'd get a second opinion on this stuff. Anyone have any good experience with these sort of products? Here's one from Pegasus...

Folks, I'm wondering current opinion on an acceptable range of bump steer would be? (per inch per corner). --Bill